Seagate Systems Partner · Exos PROTECT

Seagate Exos EP5U84

The flagship of the PROTECT range — an ultra-dense, intelligent RAID array delivering up to 1.3PB per enclosure with self-healing data protection, built for maximum capacity at low TCO.

5U Rackmount 84 x SAS Bays Up to 1.3PB

Overview

The Exos EP5U84 is the largest RAID array in the PROTECT family — the same 84-bay, 5U chassis shared with our EX5U84 SCALE and AP5U84 FUSE products, but fitted with dual redundant RAID controllers that handle data protection and management directly on the array. It's built specifically for high-capacity, transaction-dependent environments that need tighter SLA requirements and faster response times than a passive JBOD can offer on its own.

Two hot-swappable Seagate 4006 VELOSCT controllers drive the array, giving it both the processing power and the redundancy needed to sustain enterprise workloads without a single point of failure.

Key Specifications

Form Factor 5U rackmount, 84 x SAS drive bays
Controllers Dual hot-swappable Seagate 4006 VELOSCT controllers
Throughput Up to 7GB/s sequential read, 5.5GB/s sequential write
Max Capacity Up to 1.3PB per enclosure
Data Protection Seagate ADAPT — RAID 0, 1, 5, 6 and 10 supported
Connectivity Quad 10/25Gb/s SFP28 iSCSI, plus dedicated RJ45 management per controller
Expansion Expandable with Exos SCALE EX5U84 enclosures for up to 336 drives total
Power Supplies Redundant, 2200W, 80 PLUS Titanium efficiency

Why Choose the EP5U84

The EP5U84's case is maximum capacity with genuine data protection built in: up to 1.3PB in a single enclosure, with Seagate ADAPT handling intelligent, distributed drive rebuilds rather than the slower single-spare rebuild model of conventional RAID. Combined with a 99.999% availability design, parallel architecture and multi-path support, it's built to keep data accessible even during a rebuild or maintenance event.

A genuinely useful detail: when 84 bays isn't enough, the EP5U84 expands using our own EX5U84 SCALE enclosures — up to 336 drives total across the chain — meaning the array's own controllers keep managing RAID protection across a much larger pool than the base chassis alone.

The same drawer-style chassis, hot-swappable components and drive-count rules as its SCALE and FUSE siblings apply here too: quantities in multiples of 14, and a maximum of two drive sizes per system.

Common Use Cases

  • Large-scale regulated storage — Financial services, healthcare and other sectors needing maximum capacity with hardware-level RAID protection.
  • High-throughput streaming workloads — Environments demanding sustained high read/write throughput alongside substantial capacity.
  • Consolidated primary storage — Replacing multiple smaller RAID arrays with one dense, self-protecting platform.
  • Business continuity at scale — Where both capacity and near-continuous availability are non-negotiable.

Further Reading

Need help specifying the right PROTECT configuration — or working out whether SCALE, FUSE or PROTECT is the right family for your workload?

Talk to a Specialist
© 2026 Data Storage Solutions | Enterprise Data Storage Worldwide Shipping Available Privacy Policy | Sitemap | HTML sitemap
Smarter, strategic thinking.
Site designed and built using Oxygen Builder by Fortuna Data.
®2026 Fortuna Data – All Rights Reserved - Trading since 1994
Copyright © 2026