What is IBM LTO-10 tape?
LTO-10 is the tenth generation of Linear Tape-Open (LTO) Ultrium tape. Each cartridge stores 30TB of data natively, or 40TB with the higher-capacity cartridge, and up to 75TB or 100TB with 2.5:1 compression. Data is written at up to 400 MB/s natively.
Tape costs little to store, uses no power on the shelf, and a cartridge taken out of the library is completely offline. That makes LTO-10 a good fit for large archives, long-term retention and the offline backup copy that protects you from ransomware.
Need LTO-10 cartridges, drives or a library upgrade? Tell us what you have now and we'll quote the right setup.
Get an LTO-10 quote →LTO-10 specifications
| Specification | LTO-10 (30TB) | LTO-10 (40TB) |
|---|---|---|
| Native capacity | 30 TB | 40 TB |
| Compressed capacity (2.5:1) | 75 TB | 100 TB |
| Native transfer speed | 400 MB/s | 400 MB/s |
| Compressed transfer speed | 1,200 MB/s | 1,200 MB/s |
| Works with | LTO-10 drives only | LTO-10 drives only |
IBM announced its 40TB LTO-10 data cartridges in January 2026. Ask us for current availability and pricing on both capacities.
Backward compatibility: read this before you upgrade
LTO-10 drives cannot read or write LTO-9 or older tapes. This is a change from earlier generations, where a drive could usually work with the generation before it.
If you have archives on LTO-9 or older cartridges, keep a drive that can read them, or plan to migrate the data to LTO-10. We can help you work out the simplest route for your library and your retention rules.
LTO-10 vs LTO-9
| LTO-10 | LTO-9 | |
|---|---|---|
| Native capacity | 30 TB or 40 TB | 18 TB |
| Compressed capacity | 75 TB or 100 TB | 45 TB |
| Native transfer speed | 400 MB/s | 400 MB/s |
| Reads and writes | LTO-10 only | LTO-9 and LTO-8 |
Choose LTO-10 if you're starting a new archive, your data is growing fast, or you want to fit more in the same library slots. Stay on LTO-9 for now if you need to keep reading LTO-8 tapes in the same drive, or your current library has plenty of room.
Tape and ransomware protection
Ransomware often goes after backups first. A tape that has been removed from the library and stored separately can't be reached over the network at all. The NCSC recommends keeping at least one backup offline at any given time, and LTO-10 is a cost-effective way to do that at scale.
Drives and libraries
LTO-10 cartridges need an LTO-10 drive, either standalone or inside a tape library. If you already have an IBM library, we'll check whether it can take LTO-10 drives before you buy. For large estates, see the IBM TS4500 tape library.
Not sure if your library supports LTO-10? Send us the model and we'll check.
Ask a tape specialist →IBM LTO-10 FAQs
How much data does an LTO-10 tape hold?
30TB natively, or 40TB with the higher-capacity cartridge. With 2.5:1 compression that's up to 75TB or 100TB.
How fast is LTO-10?
Up to 400 MB/s natively and up to 1,200 MB/s with compression.
Can an LTO-10 drive read LTO-9 tapes?
No. LTO-10 drives only read and write LTO-10 cartridges, so keep a compatible drive for older tapes or migrate them.
Do 40TB cartridges work in any LTO-10 drive?
IBM says its 40TB cartridges are for use with Ultrium 10 drives. Check with us that your drive and library firmware are ready before ordering.
Is LTO-10 good for ransomware protection?
Yes, when cartridges are taken out of the library. An offline tape can't be reached over the network, which is why the NCSC recommends keeping at least one backup offline.
Can you supply LTO-10 in the UK?
Yes. Fortuna Data is an IBM Silver Partner and supplies IBM LTO-10 cartridges, drives and libraries across the UK. Call 01256 331614 or ask for a quote.
Sources: LTO-10 capacity, speed and compatibility from the LTO Program. IBM 40TB LTO-10 cartridges (models 564 and 664) from StorageNewsletter, January 2026. LTO-9 compatibility from Linear Tape-Open (Wikipedia). Offline backup advice from the NCSC.